Heat Protection & Heatshield Products

To Order, please (where applicable) select part number and then  click on the "add to basket" button.  Once in the shopping cart screen, the delivery charges will be quoted. We take payment  using most debit & credit cards.  You can also now use

Inferno Grade Wrap for serious heat protection
When you want all the benefits from exhuat wrap, but require a higher temperature for you manifold or turbo application then Inferno wrap will do the job. Unlike other forms of Silica wraps made from leached fibreglass, Inferno wrap is manufactured from texturized amorphous silica filament yarn. It is strong and flexible while operating at its designed service temperature of 1093.3°C (2000°F) continuous and 1648.8°C (3000°F) intermittent.  Fastened with Stainless Steel ties, Hose clamps, or wire Two sizes: 50mm x 7.5m (2" x 25') or 50mm x 15m (2" x 50')		50mm x 7.5m  £50.98 a roll	50mm x 15m  £88.98 a roll

Lava Exhaust Wrap
Made from crushed volcanic rock, our Lava Wrap has all the same benefits as exhaust heat wrap with that trick carbon fiber look and improved durability! Lava Wrap is 25% stronger than fiberglass wraps, giving is a prolonged life and greater durability. This heat wrap helps retain the heat in your manifold and/or exhaust system, which increases horsepower. This also reduces radiant heat damage. By wrapping the manifold and exhaust system, it maintains hotter exhaust gases, decreases the density, and allows the exhaust gas to exit the system faster! Greater exhaust scavenging is produced which lowers air intake temperatures. This gives you more horsepower!  Our Lava Wrap withstands 1200°F continuous (please note this is a real world rating, don't believe over inflated temperature ratings of similar products) and 2000°F intermittent.  Give your headers or exhaust system a custom look with our Lava Wrap. Two sizes: 25mm x 7.5m (1" x 25') or 50mm x 15m (2" x 50')		25mm x 7.5m  £16.98 a roll	50mm x 15m  £30.98 a roll

Coloured Exhaust Wrap
Coloured exhaust wrap adds a high quality ceramic colour coating to your wrap that increases the life of the wrap by 3 times and gives a great individual look. Wrapping the exhaust allows the maifold and exhaust system to withstand even higher temperatures from the exhaust gases, increasing exhaust scavenging and lowering intake temperatures. The coloured exhaust wrap withstands 648.9°C (1200°F) continuous and 1093.3°C (2000°F) intermittent.  Fastened with Stainless Steel ties, Hose clamps, or wire. Blue: Orange: Yellow: Silver:
5 colour choice, 50mm x 7.5m (2" x 25'): £42.98 inc VAT Red:

Tube, hose & pipe shield ceramic & 304 steel. 982.2 C (1800*F) continuous heat
The latest "thermal innovation" stops radient heat at the soure. The revoluntionary new product allows you to isolate heat by reducing radient heat damage to other vehicle components. Next generation technology allows it to be places directly on the exhaust system. Comprised of three layers the first is a stamped  half pipe of 304 stainless steel, the second is a 1/8" thick piece of ceramic insulation and the third is a stainless steel mesh to hold the pad in place. Installed in seconds simply wrap the shield around the exhaust pipe and hold in place with stainless steel ties, hose clamps or wire. Fits pipes up to 75mm (3") diameter        Shield is 35cm (14") long  £73.98 incl VAT			£73.98 inc. VAT

Heatshield Armour (exhaust insulating shield) 982.2 C (1800*F) continuous heat
Heatshield armour is great on exhausts, manifolds, and aywhere where you want to stop radiant heat damage. The outer armor allows it to be cleaned after installation, gives it a long lifespan, and also makes Heatshield Armor resistant to the elements. The inner ceramic liner makes it capable of withstanding 1800°F continuous, which allows this heat shield to be placed directly on turbo manifolds, down pipes, and exhaust pipes. It is flexible, easy to cut and install. Our Heatshield Armor keeps heat in exhaust system which creates a scavenging effect, allowing exhaust gases to flow out of the system faster and can improve the efficiency. It also prevents radiant heat and stops radiant heat damage to other vehicle components. Heatshield Armor can also be used as a thermal barrier, simply by facing the aluminized side towards the radiant heat source. For insulation applications use our stainless steel ties , stainless steel hose clamp, or wire to fasten. For use as a thermal barrier applications use high temperature spray on adhesive, screws, or rivets to fasten. Two sizes: 6.25mm thick, 30cm  x 60cm  or 12.5mm thick, 30cm x 90cm		6.25mm thick £ 42.98	12.5mm thick £66.98

Armour Weld Tape 982.2*C (1800*F) continuous heat
Armour weld tape is designed for use with the Heatshield Armour (above) to seam the edges together to complete the installation. It can also be used on the ends of exposed insulation to protect the product and extend their lifespan. Self adhesive.  Roll size 25mm  (1") x 97.5cm (39") long  £15.98 incl VAT			£15.98 inc. VAT

Inferno Shield, ideal for really hot spots  1204.4*C (2200*F)
More than just another heat shield, Inferno shields can be custom configured to handle whatever your thermal requirements are. Shields can be bent, folded, twisted etc and hold their shape. The shields come in  Inconel (1204.4°C (2200°F) continuous). Shields have an inner ceramic pad that can be trimmed for a custom fit.     6" x 14" sheet size:  £121.98			£121.98 inc. VAT

Reflect-A-Sleeve  593.3*C (1100*F)
Capable of reflecting away over 90% of radiant heat from your wiring, lines and cables. Whats more a 91cm (3') length of Reflect A Sleeve weighs less than 15cm (6") of the old silicone covered stuff. Offering superior heat protection. Can withstand 593.3°C (1100°F) continuous radiant and 260°C (500°F) of direct heat   18.75mm ID x 91cm (3/4" ID x 3') £24.98 25mm ID x 91cm (1" ID x 3') £25.98 31.25mm ID x 91cm (1 1/4" ID x 3')  £27.98 37.5mm ID x 91cm (1 1/2" ID x 3')   £30.98
Ideal for wiring/hoses/tubes -  Hook & loop Seam  (prices include VAT) 43.75mm ID x 91cm (1 3/4" ID x 3') £31.98 50mm ID x 91cm (2" ID x 3') £35.98 56.25mm ID x 91cm (2 1/4" ID x 3')  £38.98 62.5mm ID x 91cm (2 1/2" ID x 3')   £39.98

Please note: All delivery charges quoted are for within Britain (incl. Northern Ireland). Please note we cannot supply goods outside the UK.

To Order, please select part number and then  click on the "add to basket" button.  Once in the shopping cart screen, the delivery charges will be quoted.

Scarborough Racing Developments

WIN 10/11